Download Epson L3150, L3160 Resetter, or Adjustment Program Tool rar for free. No need Paid Software, No Service Engineer, No need to visit Epson Service Center. Fix it at Home or working place easily.
If you have an Epson L3150 or L3160 printer and have suddenly stopped printing. And Two Red LEDs are Blinking one by one, as shown in the picture below. That’s why you are anxious about how to fix it.
Don’t worry, sir, you are in the right place because we discuss the topic thoroughly here. If you are not able to fix it, Our Support Team will also help you. So now be relaxed and read our article carefully.
Important Note: This problem arises when Waste Ink Pad is full. With the help of EPSON Resetter below, you will able to Turn On your printer again. But it is recommended that clean or change the Waste Ink Pad also. Otherwise, it will overflow. If you want to know How to Clean the Ink Pad Click Here.
Welcome to another post of Epson printer resetter or Adjustment Program download for Free. Epson L3150 and L3160 are the most popular, Ultra High Speen, WiFi-based, Heavy-duty, and low-cost Eco-tank printer in the market by EPSON. After a huge amount of pages print, it stops the print and indicates for service through error light blinking and Service Required message on the computer screen. That’s called Waste Ink Pads Counter Overflow’.
Some other Epson Resetters or Adjustment Program
- L120 Resetter| Adjustment Program
- L380 Resetter | Adjustment Program
- L360 Resetter | Adjustment Program
- L210 Adjustment Program | Resetter Tool
- L220 Resetter | Adjustment Program
- L4150 L4160 Resetter Adjustment Program
- L3110 Resetter | Adjustment Program
- L3115 L3116 Resetter | Adjustment Program
Why Waste Ink Pads Counter Overflow?
There is a large number of sponge pads in the Epson L3150 and L3160 printer, which called “Waste Ink Pads”. During the cleaning of the printer head, It generates waste ink. These pads absorbed this type of waste ink when Waste Ink Pads are overflow, the Epson L3150 and L3160 printer stop working automatically.
How to Reset EPSON L3150 and L3160 Printer by Epson Resetter or Adjustment Program
First of all, identify the Exact Problem of your EPSON L3150 or L3160 printer. If you are not sure, you can follow the above information on the post. When you confirm that you have to reset your printer, follow the steps given below.
Note: Before starting the process you should have to disable your Antivirus Software, you have installed.
There are two parts of the Epson L3150 and L3160 resetting process. One is Keygen Activation and the other is the Adjprog Software operating process.
1. How to Activate Keygen Step by Step | Watch the Video
2. How to Reset through Adjprog Software | Follow the Image below
Follow the below steps and your will be able to reset your EPSON L3150 and L3160 Printer.
1. Open Adjprog file
Open “Adjprog” file and another window will appear, click on OK
2. Click on “Select” Button
After click on OK a new window will be appear. Click on “Select” button.
3. Choose the Port
After clicking on the Select button, a new window will appear in front of you. Choose the port from the drop-down menu.
4. Click on Particular adjustment mode Button
After choosing the PORT, a new window will be appeared in front of you. Click on “Particular adjustment mode” Button.
5. Select Waste ink pad counter
In this window you have choose “Waste ink pad counter” option. Then click on OK button.
6. Tick on Main & Platen pad counter then click Initialize Button
Tick on the Main pad counter and Platen pad counter. Then you have to click on Initialize button.
7. Click on OK button
After click on Initialize button an Information window will be appear on screen. Click on OK button.
8. Turn off your EPSON Printer
You have almost done the job. Just turn off your printer and turn on it. Your printer is ready to serve print.
How to Clean or Replace Waste Ink Pad EPSON L3150 and L3160
It is recommended that after reset your EPSON printer clean or replace the Waste Ink Pad. Watch this video carefully and clean your EPSON printer Waste Ink Pad.
Ok, guys, please make sure if you are getting benefited from this Epson L3150 or L3160 Resetter or Adjustment Program tool and your problem has solved, comment below. Now, you can share this post on social media with your friends. Thank you.
What is Resetter or Adjustment Program?
The resetter or Adjustment Program is software that provides by EPSON to counter the “Inkpad Full” issue.
Why Need to Reset?
During the head cleaning, the printer generates waste ink. InkPad absorbed this type of waste ink. When the Waste Ink Pad is near to overflow, the Epson L380 printer stop working automatically. At this point, you have to change the “InkPad” and have to run the Epson Resetter or Adjustment Program software to reset the printer to print again.
How to clean InkPad?
InkPad is made with a large number of sponge pads. You can clean it with normal water. After drying the sponge pads, you can reuse them.